O-RINGS FOR, DRAIN VALVE (2)
O-RINGS FOR, PRESSURE REGULATOR VALVE (5)
O-RING FOR, HEATER ELEMENT CONNECTOR (1)
O-RING FOR, WATER SENSOR (1)
O-RING FOR, PRESSURE REGULATOR SCREEN (2)
BOLTS & WASHERS INCLUDED:
BANJO WASHERS (2)
FUEL LINE GROMMETS (2)
2 STAINLESS STEEL BOLTS (for drain valve)
1 STAINLESS STEEL BOLT (for electrical connector)
3 ZINC PLATED INTERNAL TOOTH LOCK WASHERS (for the above bolts)
3ea 3/8 J30R9 FUEL INJECTION HOSE (each cut 1/4 to 1/2 inch long).*
1ea 5/16 J30R9 FUEL INJECTION HOSE (cut 1/4 to 1/2 inch long).*SNAP RING INCLUDED: (Not used on 1994-95 order NOK100-01 or -01A)
Snap rings are easy to lose and can be twisted such that installation into
the narrow groove is difficult. Order this kit to save time & frustration.
NEW! NOW INCLUDED IS THE SQUARE O-RING AT THE TURBO OUTLETThis o-ring is often damaged and will allow precious boost pressure to escape costing
you power and raising EGT's. Also included is how we install this o-ring to get a good
seal and prevent damage to the o-ring.
A Full Size O-Ring Drawing for Easy Identification & install location
N.A.S. Individual Part Numbers List
Where Used List, general instructions
Free1st Class Shipping OR Upgrade to USPS Priority for $3.00
Just choose your shipping method and then "Update Price"